Imagine that your bathtub is in dire necessity of replacement but don’t wish to waste your entire weekend doing this tedious and boring job? If the answer is yes then Bathtub reglazing is just the right option in your case. This may not take you more then 4 to 5 hours and then your bath tub will be just like new.
You may be wondering whenever you do the daunting task of reglazing on your own. The reply is, you definitely will if you take care of few things. One thing that you must remember while reglazing will be your own safety. This may prove to be fatal if all thecorrect protective measures will not be taken. You must cover every possible part if your body because chemicals used in the process is toxic. It is advisable that you just do the work in the open area.
Once you are armed for tub resurfacing The 1st step is to clean your tub thoroughly You need to clean take away the gasket and the caulk when you rinse the tub. You may see a wide range of chemicals inside bath refinishing kit. Out of all the chemicals the first and the next are for the purpose for cleaning. You’ll use the 1st chemical to scrub th face of a tub and also the second solution you can make the surface sore and rough.
You need to then make sure that no oil is there on any part of thebathtub. If you find oil then the “primer” will be unable to grip properly. Next, you have to make use of the third solvent to get rid of the sediment if any. Now the outer lining is ready for “primer”. Withf paper towels you will need to spread the reducer. You have to then leave the solution in the tub for around thirty minutes. Then you need to clean with primer reducerto make certain that the surface is totally dry. You need to rinse the tub many times to ensure dryness.
Next you need to protect the surface area with bath tub refinishing in places that it is not applied. These areas need to become cautiously wrapped with paper tape. You need to look into the seal carefully. You must apply base coat on the tub after sealing off the remianing area. During this period ventilation is important and use respirators for those who have them at home. You need to undergo the manual thoroughly while mixing the primer’s component. You’ll be able to spray t in the tub by using a spraying gun or something just like that.
You are nearly done with refinishing. Your next job is to color your tub. Here you are able to let your imagination run wild and you will also opt for prints. However do as instructed carefully while mixing the painttogether to the topcoat. Apply the topcoat after thirty minutes have passed from your time of applying the primer. You should use a sprat gun to make use of the topcoat. You are completely done now. Wait for around 72 hours as you step into your new reglazed bathtub.
RSS FEED